“TMEZ-KC” Flagship Multi-Head Cylinder Type Model
The TMEZ-KC series multi-head cylinder type embroidery machines are equipped with Tajima’s latest and most advanced technologies. It is suited for logo and emblem embroidery on products such as sports uniforms and hats in small to medium quantities. The i-TM and DCP allow even embroidery beginners to work on any material, at high speed and with stable quality.
High quality, stable stitches with “i-TM” and “DCP
The need to adjust the upper thread tension according to the stitch, design, or material, as is done by skilled operators on conventional embroidery machines, is no longer necessary.
The reason is that Tajima’s Digitally Controlled Presser foot (DCP) measures fabric thickness with each stitch, and its AI technology, Intelligent Thread Management (i-TM), automatically supplies the right amount of upper thread for different fabric thicknesses and stitches in just 0.05 seconds. In addition, DCP suppresses fluttering and enables stable sewing.
![](https://www.tajima.com/wp-content/uploads/2024/02/normal_8-1500x844.jpg)
Point 1: Stable production of top-quality embroidery
Even if the item to be embroidered or thread type changes frequently, such as an in-store order, the embroidery machine will always provide the best possible stitches without having to change settings.
![](https://www.tajima.com/wp-content/uploads/2023/11/itm_11-1500x865.jpg)
Point 2: Significant productivity improvements
The time required for trial sewing and adjustment can be reduced, and the speed can be increased with less worry of thread breakage, resulting in an estimated 30% reduction in processing time (compared to conventional machines). Less adjustment work allows multiple embroidery machines to be controlled at the same time, increasing production per operator.
![](https://www.tajima.com/wp-content/uploads/2024/01/image_4-1500x865.jpg)
Point 3: Minimize quality defects
The DCP reduces fabric fluttering, resulting in fewer press marks and thread trimming errors, and thus fewer defective pieces. Manual adjustment for delicate fabrics such as velvet and enameled material reduces the risk of fabric press marks.
![](https://www.tajima.com/wp-content/uploads/2024/04/freeimage_factory_1-1500x865.jpg)
Point 4: Operator early empowerment
Even in a shift-based factory, where operators are frequently replaced, embroidery can always be performed with consistent quality, regardless of the operator’s skill level. Operators become a competitive force at an early stage because of the small amount of time required to acquire skills.
Contributes to production efficiency and operator training
![](https://www.tajima.com/wp-content/uploads/2024/08/TMEZ-KC_Simulation_E.png)
*A man-hour required for upper thread adjustment is assumed to be 0, since i-TM automatically supplies the appropriate amount of upper thread for different fabric thicknesses and stitches.
*Productivity calculations assume 10,000 stitches on an 8-head embroidery machine.
*Training time can be significantly reduced because there is no need to adjust upper thread tension for different materials.
Tajima’s quality recognized by leading brands
It is used by leading brands and fashion houses. They yield a beautiful finish, regardless of whether you are using a satin stitch, a running stitch, or a fill stitch. What’s more, a variety of options for sequins and beads enables additional forms of expression. Beautiful and exquisite embroidery with multi-head technology in which all heads are synchronized.
Suitable for any finished product, regardless of the item
![](https://www.tajima.com/wp-content/uploads/2024/01/cap_1-1500x865.jpg)
Fast and clean cap embroidery
Large-diameter shaft makes it easy for anyone to install the cap frame. Three-point locking between the drive ring and cap frame provides more stable fixation, less needle breakage and pattern misalignment, and operation at a maximum speed of 1,000 rpm.
![](https://www.tajima.com/wp-content/uploads/2024/04/function_arm.jpg)
Reinforced arm supports heavy items
Three times stronger than traditional embroidery machine arms, they are also more suitable for embroidery on jackets and other heavy items.
![](https://www.tajima.com/wp-content/uploads/2024/04/function_cylinder.jpg)
Slim cylinder beds for small goods
The smaller diameter of the cylinder bed and the smaller bobbin cover allows for easy embroidery on tubular finished products such as sleeves and pockets.
User-Friendly Design
In addition to i-TM and DCP, the machine offers a wide variety of operator-friendly functions and options. This reduces operator workload while ensuring high quality embroidery production and smooth machine operation.
![](https://www.tajima.com/wp-content/uploads/2024/01/function_12.1inch_monitor-1500x865.jpg)
12.1-inch touch panel
The large 12.1-inch operation panel—one of the largest in the industry—features convenient icons and allows you to switch the language used for operating the machine.
![](https://www.tajima.com/wp-content/uploads/2024/01/function_directcommandswitch_4-1500x865.jpg)
Direct Command Switches
Located on the head, these operation switches provide control of the thread trim and other functions at each tension base for increased production efficiency.
![](https://www.tajima.com/wp-content/uploads/2024/01/function_pickerless_bobbin-1500x865.jpg)
New auto thread trimming device
Eliminating the picker makes exchanging bobbins easier. It also provides more stable trimming and a 40% improvement over conventional machines in shortening thread tails on the reverse side of the fabric.
Tajima’s Customer Support Services
Offer Personalized Embroidery Through E-Commerce and Stores
PulseID provides comprehensive support for embroidery personalization, from receiving in-store or online e-commerce orders to production and management. It saves labor and increases efficiency while helping enhance brand loyalty and advertising effectiveness.
![](https://www.tajima.com/wp-content/uploads/2024/01/image_customize_tabletorder-2.jpg)
![](https://www.tajima.com/wp-content/uploads/2024/01/sample_SAI_9.jpg)
Sales in 160 countries and regions around the world.
We have delivered machines to 160 countries and regions and have a worldwide service network. Replacing embroidery machines or starting a new embroidery business? We apply Tajima’s proprietary AI technology and software in helping resolve our customers’ business issues. Please feel free to contact us through the CONTACT form.
![](https://www.tajima.com/wp-content/uploads/2024/01/Tajima_support.jpg)
TMEZ-KC
TMEZ-KC Product Specifications
2/4/6/8
Multicolor heads
9/12/15
Needles
360/500㎜
Head interval
1,100rpm
Max Revolution
470w
(910VA)
Power consumption
Needles | Multi color head |
Head interval | Embroidery field (D×W) | Overall Width | Depth | Height | |||
---|---|---|---|---|---|---|---|---|---|
Border Frame | Wide Cap Frame | Semi-wide Cap Frame |
Tubular Frame | ||||||
9/12/15 | 2 | 500 | 450×500 mm 17.7×19.6 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×419 mm 17.2×16.5 inch |
2,260 mm 88.9 inch |
1,355 mm 53.3 inch |
1,730 mm 68.1 inch |
9/12/15 | 4 | 360 | 450×360 mm 17.7×14.1 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×279 mm 17.3×10.9 inch |
2,560 mm 100.7 inch |
1,355 mm 53.3 inch |
1,730 mm 68.1 inch |
9/12/15 | 4 | 500 | 450×500 mm 17.7×19.6 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×419 mm 17.3×16.5 inch |
3,260 mm 128.3 inch |
1,355 mm 53.3 inch |
1,740 mm 68.5 inch |
9/12/15 | 6 | 360 | 450×360 mm 17.7×14.1 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×279 mm 17.3×10.9 inch |
3,280 mm 129.1 inch |
1,355 mm 53.3 inch |
1,740 mm 68.5 inch |
9/12/15 | 6 | 500 | 450×500 mm 17.7×19.6 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×419 mm 17.3×16.5 inch |
4,260 mm 167.7 inch |
1,355 mm 53.3 inch |
1,740 mm 68.5 inch |
9/12/15 | 8 | 360 | 450×360 mm 17.7×14.1 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×279 mm 17.3×10.9 inch |
4,000 mm 157.4 inch |
1,355 mm 53.3 inch |
1,740 mm 68.5 inch |
9/12/15 | 8 | 500 | 450×500 mm 17.7×19.6 inch |
75×360 mm 2.9×14.1 inch |
83×180 mm 3.2×7.0 inch |
439×419 mm 17.3×16.5 inch |
5,260 mm 207.0 inch |
1,355 mm 53.3 inch |
1,740 mm 68.5 inch |
*Power consumption
3-phase 200V
Single-phase 100V, 200V
*Contact us for other specifications and more details.
*The actual embroidery field and embroidery speed may vary depending on the items being produced, the machine model, and the embroidering conditions.
Factory options support a wider variety of embroidery expression and increase production efficiency
![](https://www.tajima.com/wp-content/uploads/2024/01/option_sequindevice-1500x865.jpg)
Sequin Device
![](https://www.tajima.com/wp-content/uploads/2024/01/option_beadsdevice_1-1500x865.jpg)
Seed Beads Device
![](https://www.tajima.com/wp-content/uploads/2024/01/option_multicord-4.jpg)
Multi Cording Device
![](https://www.tajima.com/wp-content/uploads/2024/04/option_positionmarker_2-1500x865.jpg)
Position Marker
![](https://www.tajima.com/wp-content/uploads/2024/01/option_beamsensor.jpg)
Beam Sensor
Embroidery frame that can be applied to various items
![](https://www.tajima.com/wp-content/uploads/2024/01/Frame_10-1500x865.jpg)
Tubular Frame
![](https://www.tajima.com/wp-content/uploads/2024/01/cap_1-1500x865.jpg)
Cap Frame
![](https://www.tajima.com/wp-content/uploads/2024/01/BorderFrame_1-1500x865.jpg)
Border Frame
Catalog Download
Distributors
TAJIMAG
Recommended content
-
Dialogue・Special feature
Kasamori Corporation | Challenge yourself to do what you couldn’t before. Keep at it, and embroidery will have a bright future.
-
Customer’s voice
Kasamori Corporation | Enhancing Daily Life Through Embroidery. The Story of Developing a New Brand by Kasamori Corporation.
-
Customer’s voice
Glaucus Co., Ltd.|Applying AI embroidery machine to boost production capacity. Company opens store to make embroidery more accessible.