“TMAR-KC” Multi-head Cylinder Type High-end Model

The TMAR-KC multi-head cylinder type high-end model embroidery machine allows you to add a wide variety of embroidery to finished products, and the DCP provides a precise and beautiful finish, regardless of the material. It is suited for embroidering logos and emblems on finished products such as sports uniforms and hats in small to medium quantities.
*The TMAR-KC is configured with 2 to 8 heads, the TMAR-VC with 12 heads.
For more information, please contact us through the CONTACT form.

“DCP” Provides Stable Sewing regardless of Fabric Thickness

The Digitally Controlled Presser foot (DCP) applies proper pressure based on fabric thickness changes in just 0.05 seconds per stitch. Therefore, it instantly adapts to both thick and thin fabrics. Quilted fabrics are sewn with the padding pressed down firmly, while 3D embroidery using urethane is sewn three-dimensionally without pressing down excessively.

Point 1: Stable finish for both thin and thick materials

It firmly holds fabrics from sheer to knit materials so that they do not flutter regardless of the item.
Embroidery is always applied with consistent quality to items of varying thickness and stiffness, such as T-shirts, hats, socks, bags, etc.

Point 2: Minimize quality defects

The DCP reduces fabric fluttering, resulting in fewer press marks and thread trimming errors, and thus fewer defective pieces. Manual adjustment for delicate fabrics such as velvet and enameled material reduces the risk of fabric press marks.

More about DCP

  

Tajima’s quality recognized by leading brands

It is used by leading brands and fashion houses. They yield a beautiful finish, regardless of whether you are using a satin stitch, a running stitch, or a fill stitch. What’s more, a variety of options for sequins and beads enables additional forms of expression. Beautiful and exquisite embroidery with multi-head technology in which all heads are synchronized.

  

Suitable for any finished product, regardless of the item

Fast and clean cap embroidery

Large-diameter shaft makes it easy for anyone to install the cap frame. Three-point locking between the drive ring and cap frame provides more stable fixation, less needle breakage and pattern misalignment, and operation at a maximum speed of 1,000 rpm.

Reinforced arm supports heavy items

Three times stronger than traditional embroidery machine arms, they are also more suitable for embroidery on jackets and other heavy items.

Slim cylinder beds for small goods

The smaller diameter of the cylinder bed and the smaller bobbin cover allows for easy embroidery on tubular finished products such as sleeves and pockets.

 

User-Friendly Design

In addition to DCP, the machine offers a wide variety of operator-friendly functions and options. This reduces operator workload while ensuring high quality embroidery production and smooth machine operation.

12.1-inch touch panel

The large 12.1-inch operation panel—one of the largest in the industry—features convenient icons and allows you to switch the language used for operating the machine.

Direct Command Switches

Located on the head, these operation switches provide control of the thread trim and other functions at each tension base for increased production efficiency.

New auto thread trimming device

Eliminating the picker makes exchanging bobbins easier. It also provides more stable trimming and a 40% improvement over conventional machines in shortening thread tails on the reverse side of the fabric.

 

Tajima’s Customer Support Services

Offer Personalized Embroidery Through E-Commerce and Stores

PulseID provides comprehensive support for embroidery personalization, from receiving in-store or online e-commerce orders to production and management. It saves labor and increases efficiency while helping enhance brand loyalty and advertising effectiveness.

More about Personalization

  

Sales in 160 countries and regions around the world.

We have delivered machines to 160 countries and regions and have a worldwide service network. Replacing embroidery machines or starting a new embroidery business? We apply Tajima’s proprietary AI technology and software in helping resolve our customers’ business issues. Please feel free to contact us through the CONTACT form.

  

TMAR-KC 

TMAR-KC Product Specifications

2/4/6/8

Multi color heads

9/12/15

Needles

360/500㎜

Head interval

1,100rpm

Maximum speed

470w

Power consumption

  

Needles Multi
color head
Head interval Embroidery field (D×W) Overall Width Depth Height
Border Frame Wide Cap Frame Semi-wide
Cap Frame
Tubular Frame
9/12/15 2 500 450×500 mm
17.7×19.6 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×419 mm
17.2×16.5 inch
2,260 mm
88.9 inch
1,355 mm
53.3 inch
1,730 mm
68.1 inch
9/12/15 4 360 450×360 mm
17.7×14.1 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×279 mm
17.3×10.9 inch
2,560 mm
100.7 inch
1,355 mm
53.3 inch
1,730 mm
68.1 inch
9/12/15 4 500 450×500 mm
17.7×19.6 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×419 mm
17.3×16.5 inch
3,260 mm
128.3 inch
1,355 mm
53.3 inch
1,740 mm
68.5 inch
9/12/15 6 360 450×360 mm
17.7×14.1 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×279 mm
17.3×10.9 inch
3,280 mm
129.1 inch
1,355 mm
53.3 inch
1,740 mm
68.5 inch
9/12/15 6 500 450×500 mm
17.7×19.6 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×419 mm
17.3×16.5 inch
4,260 mm
167.7 inch
1,355 mm
53.3 inch
1,740 mm
68.5 inch
9/12/15 8 360 450×360 mm
17.7×14.1 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×279 mm
17.3×10.9 inch
4,000 mm
157.4 inch
1,355 mm
53.3 inch
1,740 mm
68.5 inch
9/12/15 8 500 450×500 mm
17.7×19.6 inch
75×360 mm
2.9×14.1 inch
83×180 mm
3.2×7.0 inch
439×419 mm
17.3×16.5 inch
5,260 mm
207.0 inch
1,355 mm
53.3 inch
1,740 mm
68.5 inch

*Power supply
 3-phase 200V 50/60Hz
 Single-phase 100V , 200-V 50/60Hz
*Contact us for other specifications and more details.
*The actual embroidery field and embroidery speed may vary depending on the items being produced, the machine model, and the embroidering conditions.
*The TMAR-KC is configured with 2 to 8 heads, the TMAR-VC with 12 heads.

 

Factory options support a wider variety of embroidery expression and increase production efficiency

Sequin Device

Seed Beads Device

Multi Cording Device

Position Marker

Beam Sensor

Click here for a list of other options.

  

Embroidery frame that can be applied to various items

Tubular Frame

Cap Frame

Border Frame

Click here for a list of other embroidery frames.

 

Catalog Download

 

Distributors

Click here for a list of distributors.